RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
Power Window Motor: Service and Repair
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the rear seats See: Body and Frame/Seats/Service and Repair/Seat - Removal .
3. Remove the rear cab back panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Rear Cab Back Panel
Trim/Removal .
4. Remove the 2 mounting bolts (1).
5. Disconnect the electrical connector to the power motor.
6. Rotate the assembly and remove the 3 screws (1) that attach the motor to the regulator.