RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
6. Locate NEW support spacers (3) on support brackets and adjust to lowest height.
7. Position seven new foam spacers (4 and 3) on the inside surface of the windshield, flush with the lower and side edges.
8. Position three new foam spacers (1) on the inside surface of the windshield, at a minimum distance of 3 mm (0.12 in.) from the top edge of the
windshield.
9. The urethane bead should be shaped in a triangular cross-section, this can be achieved by notching the tip of the applicator.
