RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
16. Tighten the lower mounting bolt to 75 in. lbs. (8.5 N.m).
17. Connect the wiper motor electrical connector (Figure 1).
18. Install the wiper motor linkage arm to the wiper motor shaft as shown in Figure 3.
NOTE:
The arms for the wiper pivots must be pointing downward (forward).
19. Install the wiper motor linkage arm nut and tighten the nut to 204 in. lbs. (23 N.m).
20. Install the plastic cowl plenum cover.
21. For vehicles equipped with a diesel engine, install the plenum cover sound deadening pad.
22. Connect the negative battery cable(s) to the negative battery post(s).
23. Close the hood.
24. Install the right and left wiper arms onto the wiper pivots and verify arm retaining clip is engaged.
25. Cycle the wipers to verify proper operation and wiper blade park position.
