RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
Hood Latch Release Cable: Service and Repair
Installation
INSTALLATION
1. Route the hood release cable through the cowl panel and install the grommet (4).
2. Position the hood release handle (2) onto the instrument panel bracket (3).
3. Install the two bolts (1) that secure the hood release handle to the instrument panel bracket. Tighten the bolts to 9 Nm (80 in. lbs.).
4. Route the hood release cable along the left fender rail and the upper radiator crossmember and install the three hood release cable retainers.
5. Install the battery tray to the left side of the engine compartment.
6. Install the hood latch .