RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
Headliner: Service and Repair
Removal
REMOVAL
NOTE: Headliner for Quad Cab model shown. Regular cab similar.
1. On Mega Cab models, remove the front seats.
2. Remove the A-pillar trim panels.
3. Remove the upper B-pillar trim panels.
4. On Quad Cab models, remove the upper C-pillar trim panels.
5. Disconnect the wire harness connector (1) located at the left A-pillar from the headliner wire harness (2).
6. Disconnect the headliner wire harness connector (3) from the inside rear view mirror.
7. Remove the overhead console.
8. Remove the sun visors (4).
9. Remove the sun visor supports (5).
10. Remove the dome lamp (6).
11. Remove the two coat hooks (7).
12. Lower the rear of the headliner (9) downward from the roof panel (10) and disconnect the headliner wire harness connector (8) from the center
high mounted stop lamp.
13. Lower the front of the headliner downward and remove the headliner through the passenger door opening.