RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
3. If equipped, remove the manual window crank (1) using a window crank removal tool (2).
4. Remove the two screws (2) that secure the door trim panel (3) to the two screw inserts (1).
5. Remove the two screws (4) that secure the door trim panel to the bottom of the door.
CAUTION: The door trim panel is attached to the door by molded plastic retaining clips that are integral to the door trim panel. Do not pull
the door trim panel directly off of the door or damage to the trim panel and/or the power switch assembly will occur.
6. Lift the door trim panel straight upward to disconnect the molded plastic retaining clips (5) from the door.
7. If equipped, disconnect the door wire harness from the power door switch assembly and remove the door trim panel.
Front Door Trim Panel - Installation
INSTALLATION
1. If equipped, connect the door wire harness to the power door switch assembly.
CAUTION: The door trim panel is attached to the door by molded plastic retaining clips that are integral to the door trim panel. Do not force
the door trim panel onto the door or damage to the trim panel and/or the power switch assembly will occur.
