RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
REMOVAL
1. Remove the front seat.
2. Remove the lumbar handle and bezel (if equipped).
3. Remove the headrest sleeves.
4. Unzip the zip strip at the lower end of the seat back and remove the seat back cover and cushion.
Installation
INSTALLATION
1. Install the seat back cushion and cover onto the seat frame assembly.
2. Connect the zip strip at the bottom of the seat back.
3. Install the headrest sleeves.
4. Install the lumbar bezel and handle, if equipped.
5. Install the seat.
Removal
REMOVAL
1. Remove the rear seat.
2. Remove the seat back bolts (1) and remove the seat back (4).
Installation
INSTALLATION
1. Install the seat back (4) and install the bolts (1).