RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
NOTE: Long cargo box shown in illustration. Short cargo box similar.
1. Position the cargo box (1) onto the frame (2) and loosely install the bolts (3) (six short box, eight long box).
2. Align the cargo box to the cab and tighten the bolts to 108 Nm (80 ft. lbs.).
3. If removed, install tail lamp units and wire harness onto the cargo box.
4. Connect the tail lamp wire harness to the underbody wire harness.
5. If removed, install the tailgate.
6. If removed, install the rear bumper.
7. If removed, install the fuel filler door.
8. Position the fuel filler (2) to the cargo box (3).
9. Install the screws (1) that secure the fuel filler to the cargo box. Tighten the screws to 2.2 Nm (20 in. lbs.).