RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
Rocker Arm Assembly: Procedures
Cleaning
CLEANING
Clean all components in a suitable solvent. If necessary, use a wire brush or wheel to remove stubborn deposits. Rinse in hot water and blow dry with
compressed air. Inspect oil passages in rocker arms and pedestals. Apply compressed air to lubrication orifices to purge contaminants.
Inspection
INSPECTION
Rocker Arms
1. Remove rocker shaft and inspect for cracks and excessive wear in the bore or shaft. Remove socket and inspect ball insert and socket for signs of
wear. Replace retainer if necessary.
Measure the rocker arm bore and shaft.
Push Rods