RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
Rocker Arm Assembly: Removal and Replacement
Removal
REMOVAL
1. Disconnect the battery negative cables.
2. Remove cylinder head cover.
3. Remove the rocker arm/pedestal fasteners and remove rocker arm (1) and pedestal (2) from cylinder head. Mark the arms and pedestals so they
can be installed in their original position.
CAUTION: When removing the rocker arms, the sockets may come loose and fall into the engine. Make sure they stay with the arm upon
removal/installation.
4. Lift the push rod(s) up and out of the engine. Mark them so they can be installed in their original position.
