RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
Muffler: Service and Repair
Installation
DIESEL
1. Install the muffler hanger rods into the isolators.
2. Install the muffler into the extension pipe.
3. Install the muffler into the tail pipe.
4. Install the exhaust clamps, align the exhaust system, and tighten the exhaust clamps to 54 Nm (40 ft. lbs.) torque.
5. Check the exhaust system for contact with the body panels. A minimum of 25 mm (1.0 in.) is required between the exhaust system components
and body/frame parts. Make the necessary adjustments, if needed.
6. Lower the vehicle.
7. Connect the battery negative cables.
8. Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.