RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
Air Duct: Service and Repair
Duct-Floor Console
Removal
REMOVAL
NOTE: Illustration shown with seat cushions removed for clarity.
1. Remove the floor console.
2. Disengage the floor console duct (1) from the rear duct adapter (3) located at the front of the rear duct (2) below the center front seat and slide the
adapter rearward into the rear duct.
3. Disengage the floor console duct from the floor distribution duct (4) located on the bottom of the HVAC housing (5) and remove the console duct
from the vehicle.
NOTE: Illustration shown with center front seat removed for clarity.
4. If required, remove the front seat and remove the three push-pin retainers (1) that secure the rear duct (2) to the bottom of the center seat support
(3).
5. Disengage the rear duct from the rear outlet (4) and remove the rear duct.
Installation
INSTALLATION
