dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Duct-Floor Console|Page 12165 > < Duct-Floor Console|Page 12163
Page 1
background image

Air Duct: Service and Repair
Defroster Duct

Removal

REMOVAL

WARNING:  Disable the airbag system before attempting any steering wheel, steering column, or instrument panel component diagnosis or
service. Disconnect and isolate the battery negative (ground) cable, then wait two minutes for the airbag system capacitor to discharge before
performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the proper precautions could
result in accidental airbag deployment and possible personal injury or death.

NOTE:  Take the proper precautions to protect the instrument panel from cosmetic damage.

1. Remove the instrument panel and place it on a workbench.

2. If required, disconnect the center radio speaker wire harness connector (1) and position it the wire harness lead out of the way.

3. Remove the screw (4) that secures the defroster duct adapter (3) to the instrument panel support.

4. Remove the defroster duct adapter from the defroster duct (5).

5. Remove the six screws (2) that secure the defroster duct to the instrument panel.

6. Remove the defroster duct from the instrument panel.

Installation

INSTALLATION

Duct-Floor Console|Page 12165 > < Duct-Floor Console|Page 12163