RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
Condenser HVAC: Service and Repair
Removal
5.9L/6.7L DIESEL ENGINES
WARNING: Refer to the applicable warnings and cautions for this system before performing the following operation. Failure to follow the
warnings and cautions could result in possible personal injury or death.
NOTE: Illustration shown with air seal removed for clarity.
1. Disconnect and isolate the negative battery cable.
2. Recover the refrigerant from the refrigerant system.
3. Remove the air seal from the right end of the A/C condenser (5) to gain access to the refrigerant line fittings.
4. Disconnect the A/C discharge line (1) and the A/C liquid line (3) from the A/C condenser (5).
5. Remove the four bolts (2, 4, 6 and 7) that secure the A/C condenser to the charge air cooler.
6. Remove the A/C condenser from the engine compartment.