RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
9. If you have less than 570ml of fuel in the graduated cylinder, inspect the fuel supply line from the fuel tank to the fuel filter housing and the fuel
supply line between the fuel filter housing and the high pressure fuel pump for signs of damage, replace as necessary. If no damage is found, replace the
fuel filter and retest.
10.Verify the Screened Banjo Bolt at the outlet of the fuel filter is free of debris. If debris is found, rinse screen with water, blow dry and reinstall. Retest
vehicle. If flow meets specification then trace back the source of debris, if flow is still below spec repair damaged component.
11. If reading is still less than 570ml in 10 seconds, remove the fuel tank and fuel tank module. Inspect for damage and/or debris in and around the fuel
tank module. If module is damaged, replace and retest.
12. If the module is not damaged, replace the fuel lift pump and retest to confirm fix.
Test complete
Repair
-
Test complete.
-
Perform POWERTRAIN VERIFICATION TEST. See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Powertrain Verification Test
