RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
Diesel Particle Filter (DPF): Service and Repair
Installation - P/U
6.7L DIESEL - P/U
1. Position new exhaust flange gaskets on catalytic converter to DPF flange.
2. Install flange bolts. Hand tighten only.
3. Install muffler and tailpipe assembly
4. Install new band clamp. Hand tighten only.
5. Check the exhaust system for contact with the body panels. A minimum of 25 mm (1.0 in.) is required between the exhaust system components
and body/frame parts. Make the necessary adjustments, if needed.
6. Tighten flange nuts to 54 Nm (40 ft. lbs)
7. Tighten band clamp nuts to 52 Nm (40 ft. lbs.)
8. Install temperature sensor. Tighten to 29.8 Nm (22 ft. lbs.)
9. Install front and rear (6 and 4) exhaust differential pressure tubing. Tighten to 30 Nm (22 ft. lbs.)
10. Install flexible exhaust differential pressure sensor tubing.
11. 4X4 Vehicles - Install transmission crossmember.
12. 4X4 Vehicles - Install transfer case skid plate.
