RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
7. Remove nuts (7) and remove upper heat shield (6).
8. Remove bolts (10), nut (8) and remove lower heat shield (9).
9. Remove bolts (5) and (14).
10. Separate casting (4) from casting (15) and discard gasket (3).
11. Disconnect electrical connector (1).
12. Remove bracket bolts (2) at outside of mounting bracket.
13. Remove bracket bolts at inside of mounting bracket.
14. Remove EGR cooler bypass valve assembly from engine.
Installation-Pick Up Models
INSTALLATION-PICK UP MODELS
