RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
9. Connect electrical connector (1).
10. Fuel Filter Head (Housing):
a. Install fuel filter head to cylinder head. Tighten bolts to 32 Nm (24 ft. lbs.) torque.
b. Replace sealing washers on banjo bolts and install all low-pressure fuel lines to filter housing. Tighten banjo bolts to 24 Nm (18 ft. lbs.)
torque. Tighten quick-connect fitting to 27 Nm (20 ft. lbs.) torque.
c. If equipped, install transmission dipstick tube to filter housing. Tighten bolt to 10 Nm (8 ft. lbs.) torque.