RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
7. Loosen fittings (9).
CAUTION: WHEN LOOSENING OR TIGHTENING HIGH-PRESSURE LINE FITTINGS (11) ATTACHED TO A SEPARATE
FITTING (12), USE A BACK-UP WRENCH ON FITTING (12). DO NOT ALLOW FITTING (12) TO ROTATE. DAMAGE TO BOTH
FUEL LINE AND FITTING WILL RESULT.
8. Loosen fittings (11) and remove all fuel lines (1). Note and mark position of each fuel line while removing.
9. Remove fuel line connecting injection pump to fuel rail.
10. Remove fuel injection rail mounting bolts (7).
11. Remove rail (6) from top of intake manifold.