RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
2.
Place a transmission jack under the front of the fuel tank to support the fuel tank (Figure 1).
CAUTION:
Place a block of wood on the transmission jack to prevent damage to the fuel tank.
3.
Remove and discard the front fuel tank strap nut.
4.
Using the transmission jack, lower the front of the fuel tank slightly.
5.
Remove and discard the original front fuel tank strap.
6.
Insert the new front fuel tank strap into the frame side slot and align the strap over the fuel tank stud.
7.
Hand-start the new fuel tank strap nut.
8.
Carefully raise the fuel tank into position using the transmission jack.
9.
Tighten the fuel tank strap nut to 45 ft. lbs. (61 N.m).
10.
Lower the transmission jack and move it to the rear of the fuel tank.