RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
Fuse: Description and Operation
Description
DESCRIPTION
All vehicles are equipped with an Ignition-Off Draw (IOD) fuse that is disconnected within the Totally Integrated Power Module (TIPM) when the
vehicle is shipped from the factory. Dealer personnel are to reconnect the IOD fuse in the TIPM as part of the new vehicle preparation procedures and
then disconnect it again until new vehicle delivery to the customer.
A laser printed fuse layout map is integral to the TIPM cover to ensure proper fuse identification. The IOD fuse is a 20 ampere mini blade-type fuse.
The fuse is secured within a black molded plastic fuse holder and puller unit that serves both as a tool for disconnecting and reconnecting the fuse in the
TIPM cavity, and as a fuse holder that conveniently stores the fuse in the same cavity after it has been disconnected.
CIRCUITS INCLUDED WITH IOD FUSE
-
Cluster (CCN)
-
Diagnostic Connector
-
Map Lamps
-
Glove Box Lamp
-
Courtesy Lamps
-
Radio
-
Underhood Lamp
