RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
Removal
REMOVAL
1. Remove the steering knuckle.
2. Remove the axle shaft from the axle.
3. Position special tool 6761 (RECEIVER) (2) and 8445-3 (DRIVER) (4) with C-4212-F (PRESS)(1) as shown to remove upper ball stud.
Installation
INSTALLATION
1. Position special tool 8445-2 (DRIVER) (2) and 8975-5 (RECEIVER) (5) with C-42121-F (PRESS)(1) as shown to install upper ball stud (3).
2. Install the axle shaft into the axle
3. Install the steering knuckle.
