RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
Stabilizer Link With Disconnecting Stabilizer Bar
STABILIZER LINK WITH DISCONNECTING STABILIZER BAR
1. Install links (1) to the axle bracket (5) and tighten nut (4) to 149 Nm (110 ft. lbs.).
2. Install links (1) and nuts (3) to the stabilizer bar (2). Hold the link shaft with a wrench and tighten the nuts to 149 Nm (110 ft. lbs.).
3. Remove the supports and lower the vehicle.
