RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
Shifter A/T: Service and Repair
Removal
REMOVAL
1. Remove the kneeblocker (2) and steering column opening reinforcement (1).
2. Remove the upper and lower column shrouds (1&2).
3. Loosen the column bolts and lower the column enough to allow clearance for the gear shift lever removal.
4. Disconnect the overdrive switch harness (3) (if equipped).
5. Disconnect the shift cable (2) from the shift lever.
6. Remove the gear shift lever mounting screws (1).
