RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
9. Press U-joint bearing caps (1) out of flange (2).
10. Remove bearing cap on the outside of the flange.
11. Position U-joint press (2) with receiver (1) on flange.
12. Press remaining U-joint bearing cap out of flange.
13. Remove U-joint from flange.
Disassembly - With Snap Rings
DISASSEMBLY - WITH SNAP RINGS
1. Tap outside of bearing cap with a drift to loosen snap ring.
2. Remove snap rings (1) from both sides of yoke.
