RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
5. Mark bearing caps left and right for installation reference.
6. Remove bearing cap bolts and remove bearing caps.
7. Loosen differential bearing (1, 3) adjusters (2, 4) with a hammer and punch.
8. Remove differential case from the housing.
9. Remove bearing cups (1, 3) and tag them left and right for installation reference.
Installation
INSTALLATION
1. Clean the housing cavity with a flushing oil, light engine oil or lint free cloth.
NOTE: Do not use water, steam, kerosene or gasoline for cleaning.
2. Lubricate differential case bearing.
3. Install differential case with bearings cups into the housing.
NOTE: A light coat of grease on the cups will hold them in place during installation.
4. Install bearing caps (2) and bolts. Tighten the bearing cap (2) bolts finger-tight.
NOTE: Do not torque bearing cap and bolts at this time.