RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
Front Door Latch: Service and Repair
Front Door Latch - Removal
REMOVAL
1. Raise the window to the full up position and remove the door trim panel See: Front Door Panel/Service and Repair/Front Door Trim Panel -
Removal .
2. Position the water dam out of the way and disconnect the actuator rod (3) from the door latch (2) and the interior door handle actuator (5) and
remove the rod.
3. Disconnect the door wire harness connector (2) from the door latch (3).
4. Remove the three bolts (4) that secure the door latch to the door (1) and remove the latch.