RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
1. Position the front door seal (6) to the bottom of the door opening, with bulb facing outboard, starting the installation at the center of the lower
flange. Press the seal onto the sill flange and work around the perimeter of the door opening until fully seated. Work in one direction, smoothing
the seal to avoid puckers or wrinkles.
2. If vehicle is a Standard Cab , install the lower b-pillar trim (3) See: Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/B-Pillar
Trim .
3. If vehicle is a Quad Cab , install the lower b-pillar trim (1) See: Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/B-Pillar
Trim .
