RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
Passenger Assist Handle: Service and Repair
B-Pillar Grab Handle
Removal
REMOVAL
1. Using a small flat-bladed tool, carefully open the two fastener covers (2) located on the grab handle (1).
2. Remove the two bolts (3) that secure the grab handle to the B-pillar and remove the grab handle.
Installation
INSTALLATION
1. Install the grab handle (1) onto the B-pillar and install the two bolts (3). Tighten the bolts to 6 Nm (55 in. lbs.).
2. Close the two fastener covers (2) located on the grab handle.