RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
Seat Back: Service and Repair
Center Seat Back Inertia Hinge Cover
Removal
REMOVAL
NOTE: Free pivot hinge cover is removed with the free pivot hinge See: Center Seat Back Hinge/Removal.
1. For the inertia hinge cover disconnect the zip strip (1).
2. Position aside the storage bin/cushion cover (4).
3. Remove the pivot bolt (5).
4. Open the hinge cover at the bottom and remove the hinge cover (1).
Installation
INSTALLATION