dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Center Armrest / Seat Back|Page 15030 > < Center Armrest / Seat Back|Page 15028
Page 9
background image

1. Install the loop (1) and install the bolts (2).
2. Tighten the bolts (2) to 12 Nm (9 ft. lbs.).
3. Install the seat  See: Service and Repair/Seat - Installation .

Front

REMOVAL

1. Remove the front seat  See: Service and Repair/Seat - Removal .
2. Remove the lumbar handle and bezel (if equipped)  See: Service and Repair/Lumbar Support Handle/Bezel/Removal .
3. Remove the headrest sleeves  See: Head Rest/Service and Repair/Headrest Sleeve - Removal .
4. Unzip the zip strip at the lower end of the seat back and remove the seat back cover and cushion.

Rear

REMOVAL

1. Remove the rear seat back.  See: Seat Back - Removal
2. Remove the headrest sleeves.  See: Head Rest/Service and Repair/Headrest Sleeve - Removal
3. Unzip the zip strip at the bottom of the seat back and remove the cover.

Rear - Mega Cab

REMOVAL

1. Fold both rear seats flat.
2. Remove the filler panels from the rear seat to storage compartment.
3. Separate the J-straps at the bottom of the seat back.
4. Remove both hinge covers from the back section being worked on.
5. Remove the lower anchor for the center seat belt.
6. Disconnect the lower cable attachment from the seat back release.
7. Remove the four bolts and remove the seat back from the seat.
8. Mark the location of the cables at the cushion and remove.
9. Remove the upper cushion pivot bolts.

10. Remove the lower cushion pivot bolts.
11. Remove the cushion from the seat.
12. Remove the seat release/recline handle.
13. Separate the J-straps for the cover to the seat pan.
14. Remove the cover/cushion from the seat pan and separate the foam from the cover.

Front

INSTALLATION

1. Install the seat back cushion and cover onto the seat frame assembly.
2. Connect the zip strip at the bottom of the seat back.
3. Install the headrest sleeves.  See: Head Rest/Service and Repair/Headrest Sleeve - Installation
4. Install the lumbar bezel and handle, if equipped.  See: Service and Repair/Lumbar Support Handle/Bezel/Installation
5. Install the seat.  See: Service and Repair/Seat - Installation

Rear

INSTALLATION

Center Armrest / Seat Back|Page 15030 > < Center Armrest / Seat Back|Page 15028