RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
Valve: Procedures
VALVES, GUIDES AND SPRINGS
REMOVAL
1. Remove cylinder head See: Service and Repair/Removal and Replacement/Cylinder Head - Removal .
2. Support cylinder head on stands, or install head bolts upside down (through combustion surface side) to protect injector tips from damage from
work bench.
3. Install the valve spring compressor mounting base (1) as shown.
4. Install the compressor top plate, washer, and nut. Using a suitable wrench, tighten the nut (clockwise) to compress the valve springs and remove
the locks.
5. Rotate the compressor nut counter-clockwise to relieve tension on the springs. Remove the spring compressor (1).
