RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
Condenser HVAC: Service and Repair
A/C Condenser - Removal
5.9L/6.7L DIESEL ENGINES
WARNING: Refer to the applicable warnings and cautions for this system before performing the following operation See: Service
Precautions/Warning and See: Service Precautions/Caution. Failure to follow the warnings and cautions could result in possible personal
injury or death.
NOTE: Illustration shown with air seal removed for clarity.
1. Disconnect and isolate the negative battery cable.
2. Recover the refrigerant from the refrigerant system See: Service and Repair/Refrigerant System Recovery .
3. Remove the air seal from the right end of the A/C condenser (5) to gain access to the refrigerant line fittings.
4. Disconnect the A/C discharge line (1) and the A/C liquid line (3) from the A/C condenser (5) See: Hose/Line HVAC/Service and Repair/A/C Line
- Removal and See: Hose/Line HVAC/Service and Repair/A/C Line - Removal .
5. Remove the four bolts (2, 4, 6 and 7) that secure the A/C condenser to the charge air cooler.
6. Remove the A/C condenser from the engine compartment.
