RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
Intake Air Heater Relay: Service and Repair
Installation
INSTALLATION
The intake manifold air heater relay (5) is located in the engine compartment. It attached to a bracket. This bracket is attached to the right battery tray
(3).
The mounting bracket and relay is replaced as an assembly.
1. Position relay and install two relay mounting bracket screws (6).
2. Position cables (1) to mounting studs and install nuts (2).
3. Connect relay trigger wires (4) at relays.
4. Connect both negative battery cables to both batteries.