RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
c. Using special tool C-4150A, separate the steering drag link inner joint from the pitman arm (Figure 4).
d. While counting the number of turns, unscrew the steering drag link inner joint from the drag link adjuster sleeve (right handed threads) (Figure
5).
CAUTION:
Do not allow the drag link adjuster sleeve to turn while unscrewing the drag link inner joint.
e. Screw in the new steering drag link inner joint into the drag link adjuster sleeve the same number of turns counted in step 4d. of this procedure.
f.
Connect the new steering drag link inner joint to the pitman arm.
g. Install the new steering drag link inner joint nut and tighten the nut to 100 ft. lbs. (135 N.m).
