RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
3. Position special tool 6761 (RECEIVER) (2) and 8445-3 (DRIVER) (4) with C-4212-F (PRESS)(1) as shown to remove upper ball stud.
4500 & 5500 - Link/Coil
4500 & 5500
NOTE: The upper ball joints screw in and out (they are not pressed in).
1. Remove the wheel and tire assembly.
2. Support the lower part of the steering knuckle.
3. Remove the upper ball joint nut (1).
4. Disconnect the wheel speed sensor wire from the bracket (3).
5. Install a 60 mm socket (1) and unscrew the upper ball joint (2) from the steering knuckle.
6. Remove the wheels speed sensor wire bracket (3).
