RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
Wheel Fastener: Service and Repair
Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the brake caliper, caliper adapter and rotor, See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and
Repair/Removal and Replacement/Brake Rotor - Removal .
4. Remove the wheel speed sensor from the hub.
5. Press the stud from the hub using remover C-4150A (1).
6. Remove the stud (2) from the hub (1) through the backing plate access hole (3).