RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
Air To Oil Cooler - Diesel
AIR TO OIL COOLER - DIESEL
1. Carefully position the oil cooler assembly to the vehicle.
2. Install two nuts and one bolt. Tighten to 11 Nm (95 in. lbs.) torque.
3. Connect the quick-connect fittings to the transmission cooler lines See: Procedures .
4. Install Charge Air Cooler See: Powertrain Management/Fuel Delivery and Air Induction/Turbocharger/Intercooler/Service and Repair/Installation
.
5. Start the engine and check all fittings for leaks.
6. Check the fluid level in the automatic transmission.
Water-To-Oil Cooler
INSTALLATION - WATER-TO-OIL COOLER
