RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
Axle Shaft: Service and Repair
Front Axle - 9 1/4 AA
Removal
REMOVAL
1. With the vehicle in neutral, position vehicle on hoist.
2. Remove brake caliper, rotor and ABS wheel speed sensor if equipped.
3. Remove axle shaft (2) cotter pin (3), hub nut (1) and washer.
4. Remove four hub bearing bolts (2) from the back of the steering knuckle.
5. Remove hub bearing from the steering knuckle.