RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
6. Remove axle shaft (2) from steering knuckle (1) and axle housing.
Installation
INSTALLATION
1. Clean axle shaft and apply a thin film of grease to the shaft splines and hub bore.
2. Install axle shaft (2) through the steering knuckle (3) and into the differential side gears.
3. Install hub bearing in the knuckle.
4. Install hub bearing bolts (2) and tighten to 202 Nm (149 ft. lbs.).
