RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
3. Install hub bearing in the knuckle.
4. Install hub bearing bolts (1) and tighten to 200 Nm (147 ft. lbs.).
5. Install ABS sensor, brake rotor (1), hub extension (2), caliper adapter and caliper.
6. Install axle hub nut (3) and tighten nut to 330 Nm (243 ft. lbs.).
7. Bend axle shaft hub nut (3) collar into axle keyway with a hammer and punch.
Removal
REMOVAL
1. With vehicle in neutral, position vehicle on hoist.
2. Remove wheel and tire assembly.
3. Remove brake caliper (3), adapter (2) and rotor (1).