RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo (2008)
1. Install new O-ring (1) on axle flange (2).
2. Slide axle shaft (1) into the axle.
3. Install bolts (1) in axle flange (2) and tighten to 133 Nm (98 ft. lbs.).
1. Install new O-ring (1) on axle flange (2).
2. Slide axle shaft (1) into the axle.
3. Install bolts (1) in axle flange (2) and tighten to 133 Nm (98 ft. lbs.).