RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Antenna Cable: Service and Repair
Antenna Cable - Instrument Panel
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the glove box.
3. Remove the instrument panel center bezel.
4. Remove the radio.
CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector could damage the cable
or radio.
5. Disconnect the antenna cable by pulling the locking antenna connector away from the radio.
6. Remove antenna cable from instrument panel by pulling on retaining fasteners.
Installation
INSTALLATION