RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
1. If equipped, connect the door wire harness (2) to the power door switch assembly.
CAUTION: The door trim panel is attached to the door by molded plastic retaining clips (4) that are integral to the door trim panel. Do not
force the door trim panel onto the door or damage to the trim panel and/or the power switch assembly will occur.
2. Position the trim panel to the door and insert the door lock (1) through the hole in the trim panel.
3. Position the door trim panel and align the molded plastic retaining clips (4) to the door slots (5).
4. Push the door trim panel straight downward until all of the retaining clips are fully engaged to the door.
5. Install the screws (3).
6. if equipped, install the manual window crank.