RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Rear Cross-Member: Service and Repair
Installation
INSTALLATION
1. On Light Duty Vehicles, install the crossmember (2) and the bolts (4). Tighten the bolts to 102 Nm (75 ft. lbs.).
2. Install the transmission mount nuts and tighten to 54 Nm (40 ft. lbs.).
3. On Heavy Duty Vehicles, install the crossmember (4) and the bolts (3). Tighten the bolts to 115 Nm (85 ft. lbs.).
4. Install the transmission mount nuts and tighten to 54 Nm (40 ft. lbs.).
5. Remove the transmission support (2).
