RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
5. Install the two bolts (4) that secure the jack assembly (2) to the floor panel (3).
6. Position the jack assembly onto the two bolts and install the retaining screw (1) . Tighten the screw securely.
7. On Quad Cab models, install the bolt that secures the lower seat belt anchors the floor panel near the B-pillars. Tighten the bolt to 40 Nm (30 ft.
lbs.).
8. Install the lower B-pillar trim panels.
9. On Quad Cab models, install the rear seat (1).
10. On Quad Cab models, install the rear cup holder (2).
11. If equipped, position the rear storage compartment (2) onto the rear cab trim panel (4) and install the three bolts (1). Tighten the bolts to 6 Nm (55
