RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
5. Open the hinge cover flap (1) and remove the wire harness (5 - if equipped).
6. Remove the cover (3) from the hinge (4).
INERTIA HINGE
NOTE: Do not reuse the seat fasteners, always replace with new ones.
1. Remove the seat back.
2. Remove the seat back inertia hinge cover.
3. Remove and discard the inertia hinge bolts (1) and remove the hinge (3).
Installation
INSTALLATION
FREE PIVOT HINGE/COVER