RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Control Assembly: Service and Repair
Installation
INSTALLATION
NOTE: Single zone A/C-heater control shown. Dual zone similar.
1. Position the A/C-heater control (2) into the back of the instrument panel center bezel (1).
2. Install the four screws (3) that secure the A/C-heater control to the center bezel. Tighten the screws to 2.2 Nm (20 in. lbs.).
3. Connect the wire harness connectors (4 and 5) to the back of the A/C-heater control and install the instrument panel center bezel.
4. Reconnect the negative battery cable.