RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Diesel Particle Filter (DPF): Service and Repair
Removal - P/U
6.7L DIESEL - P/U
1. Raise and support the vehicle.
2. Saturate the bolts and nuts with heat valve lubricant. Allow 5 minutes for penetration.
3. Loosen and remove DPF differential pressure tubes (4 and 6).
4. Disconnect and remove temperature sensor (2).
5. 4X4 Vehicles - Remove transfer case skid plate.
6. 4X4 Vehicles - Remove transmission crossmember.
7. Remove DPF to muffler clamp (5). Discard clamp.
8. Move muffler and tail pipe assembly toward rear of vehicle.
9. Remove DPF to catalytic converter flange nuts.
10. Remove DPF. Discard flange gaskets.
