RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Wheel Speed Sensor: Service and Repair
Sensor- Wheel Speed-ABS-Front
Removal
REMOVAL
1. Remove the front rotor.
2. Remove the wheel speed sensor mounting bolt (1) from the hub (3).
3. Remove the wheel speed sensor (2) from the hub (3).
4. Remove the wiring from the clips and disconnect the electrical connector.
Installation
INSTALLATION
1. Install the wiring to the clips and Reconnect the electrical connector.
2. Install the wheel speed sensor (2) to the hub (3).
3. Install the wheel speed sensor mounting bolt (1) to the hub (3). Tighten the bolt to 21 Nm (190 in. lbs.).
4. Install the front rotor and brake caliper assembly.